DESCRIPTION
Motor Current Signature Analysis (MCSA) is a diagnostic and technique that is used to analyze motors. As a preventative maintenance tool, MCSA can be used to perform a one-time test or periodic testing to track and trend motor performance. MCSA allows for remote, non-intrusive testing of the equipment being monitored.

COURSE OUTCOME
After successfully completing this course, Participants will able to do the following:
•A hands-on understanding Motor Current Signature Analysis (MCSA)
•The electrodynamics and construction of induction motors
•The features of high quality motors
•The design and operation of variable frequency drives
•Increased confidence in fault diagnosis

COURSE OUTLINE
1.Asset management, RBM, CBM, and condition monitoring for electrical drive systems
2.Causes and effects of: broken rotor bars, abnormal air-gap eccentricity, shorted turns in stator windings, shaft/coupling misalignment, stator core vibration characteristics and problems
3.Interrelationships between current and vibration monitoring to detect the root cause (RCA) of problems
4.Fundamentals on current signature analysis
5.MCSA instrumentation
6.Current signature patterns due to faults
7.Reliable interpretation of current spectra
8.Effect of motor design, load, and drive train
9.Prediction of fault severity: reliability and limitations

COURSE METHODE COORDINATOR
•Presentation
•Discussion
•Simulation
•Case Study
•Evaluation

Facilities:
•Convinience Meeting room
•Fee Instruktur
•2x coffee break and lunch during training
•Training kit
•Hard and soft copy material
•Certificate
•Souvenir

Registration Contact
Egga
WA:081343582804
Email: eggatraining@gmail.com

TDrm

The post Motor Current Signature Analysis (MCSA) appeared first on SEMINAR BAGUS.

DESCRIPTION
The use of conveyors in material handling has been around since the early 20th century and can be known as the back bone of material handling. Belt conveyors range in length from a few feet to several miles. They carry everything from small packages to thousands of tons of bulk material per hour. A belt conveyor can unload a barge load of coal and deliver predetermined amounts to several, one hundred feet high silos, a thousand yards away in minutes. Another belt conveyor will precisely meter variable amounts of the coal to a boiler.
With their long history, conveyors are easier known as a piece of equipment that moves material from one place to another and are especially useful when applications call for the transportation of heavy or bulky material. Conveyor systems also allow quick and efficient transportation for a wide variety of materials at all shapes and sizes.
This class is developed for companies who not only want a highly skilled workforce but also want to experience the full benefits of improved conveyor performance. After the completion of this training, the participant should be able to understand the terminology, selection, safety, operation, maintenance and troubleshooting the problems of conveyor.

TRAINING OBJECTIVES
•Impart a total understanding of belt conveyors to the delegates equipping them to add value to the workplace through added subject knowledge and understanding
•Understand the basics of conveying bulk materials by means of belt conveyors
•Understand the QC procedures of belt conveyor operation and maintenance

COURSE CONTENTS
1.Introduction To Conveyor Management System
2.Belt Conveying
3.Safety Of Conveyors
4.Conveyor Safety Standard
5.Fundamentals of bulk materials handling;
6.Design, Components and Operation:
•Design and layout Consideration
•Model Sizes and other specification
•Operations
•Components
7.Conveyor Application: Factories and other industrial production environment
8.Operation and maintenance of conveyor; safety of conveyors;
9.troubleshooting of conveyor problems; design and installation;
10.Belting for Conveyors
11.Belting for Conveyors
12.Splicing The Belt
13.Tail Pulleys and Transition Areas
14.Loading Chute
15.Belt Support and Skirt boar
16.Perancangan Belt Conveyor :
•Pemilihan lebar dan kecepatan belt
•Pemilihan belt & Pemilihan idler
•Perhitungan tegangan dan daya
•Pemilihan pulleys
•Sistem penggerak dan sistem pengencang
13.Maintenance System
•Konsep maintenance
•Belt Conveyor Maintenance
14.Maintenance System
15.Belt Conveyor Inspection

WHO SHOULD ATTEND
•Maintenance Engineers, Operator and Technicians
•Plant Engineer,
•Conveyor Supervisors
•Mechanical Engineers and Technicians
•Design Engineers
Electrical Engineers and Technicians

Facilities:
•Convinience Meeting room
•2x coffee break and lunch during training
•Training kit
•Hard and soft copy material
•Certificate
•Souvenir

Registration Contact
Egga
WA:081343582804
Email: eggatraining@gmail.com

TDrm

The post Operation, Maintenance and Troubleshooting of BELT CONVEYOR appeared first on SEMINAR BAGUS.

DESCRIPTION
Partial Discharge (PD), as its name would suggest, is an electrical discharge that occurs across a portion of the insulation between two conducting electrodes, without completely bridging the gap. PD’s are caused when there is a discontinuity in the insulation system and as a general ‘rule-of-thumb’ PD will occur in systems operating at voltages of 3000V and above (although it should be noted that PD can occur at lower voltages than this). Partial discharges can occur in voids in solid insulation (paper, polymer etc), along the interfaces of multi-layer solid insulation systems, in gas bubbles in liquid insulation or around an electrode in a gas (corona discharge). Partial Discharge activity can initiate under normal working conditions in high voltage equipment where the insulation condition has deteriorated with age, has been aged prematurely by thermal or electrical over-stressing or due to improper installation (this leads to ‘infant mortality’). PD can often be observed with the commissioning of new equipment due to improper installation, poor design and/or workmanship (this is seen particularly in cable joints and terminations which are made-up on site). It is known that poor workmanship can lead to ‘infant mortality’ of MV/HV networks with a disproportionate percentage of insulation failures being observed within the first 1-3 years of service compared to the rest of the service life of the cables/plant

COURSE OUTCOME
•To understand the basics of stator winding insulation systems and why they deteriorate
•To understand basic PD theory
•To understand how PD detection devices work
•To interpret the test data collected and relate the data to specific failure mechanisms, to enable you to plan maintenance

COURSE OUTLINE
1.Introduction to Partial Discharge and Diagnostics for High Voltage Equipment
2.Equipment failure mechanisms
3.Conventional and unconventional test techniques
4.On-line and Off-line methods
5.How to test different items of plant
6.Deployment of PD Testing in Asset Management Programs
7.Ageing population problem
8.Focus plant replacements/avoid unplanned outage
9.Increasing failure rate or problem with a particular plant type
10.Troubleshooting and failure investigations
11.Safety (mostly with cable terminations & sealing ends/outdoor HV plant)
12.Quality Assurance
13.Partial Discharge Testing and Diagnostics for MV and HV Cables
14.Introduction to test methodologies
15.PD Location methods
16.Assessing criticality
17.PD Testing and Diagnostics for MV Switchgear
18.Introduction to test methodologies
19.PD Location methods
20.Assessing criticality
21.Partial Discharge Testing and Diagnostics for Motors and Generators
22.Introduction to Online PD Testing of HV Motors & Generators
23.Recognising Phase-Resolved PD (PRPD) Patterns
24.Assessing criticality
25.Case studies

COURSE METHODE COORDINATOR
•Presentation
•Discussion
•Simulation
•Case Study
•Evaluation

Facilities:
•Convinience Meeting room
•2x coffee break and lunch during training
•Training kit
•Hard and soft copy material
•Certificate
•Souvenir

Registration Contact
Egga
WA:081343582804
Email: eggatraining@gmail.com

TDrm

The post Partial Discharge Training appeared first on SEMINAR BAGUS.

Deskripsi
Pelatihan power transformer ini ditujukan untuk meningkatkan pengetahuan dan wawasan peserta mengenai Power Distribution Transformer Pelatihan ditekankan pada aspek instalasi, operasi, proteksi dan pemeliharaan untuk meningkatkan kontinuitas pelayanan daya sehingga kegagalan operasi dapat dicegah seminimum mungkin dan efisiensi dapat ditingkatkan.

Tujuan
1.Mengenali konstruksi Transformator daya beserta komponen-komponen pendukungnya
2.Menginterpretasikan data pada nameplate serta memilih Transformator
3.Memahami klasifikasi Transformator
4.Mengkoneksi, menginstall dan mengoperasikan Transformator daya
5.Memahami system proteksi pada Transformator
6.Memahami pengujian Transformator untuk pemeliharaan
7.Memahami pelaksanaan pemeliharaan Transformator

Materi
1.Electrical Power Distribution System overview
•System overview
•Types of Distribution Network
•Switchgear
2.Electrical Power Transformer
•Construction
•Principles of operation
•Types
•Cooling classifications
•Components and indicators
3.Electrical Power Transformer Operation
•Interpret name plate data
•Vector group
•Design Transformer sizing and Selection Guide
4.Fundamental protection concepts
•System protection Philosopy
•Types of protection relays and Characteristics
5.Relay input sources
•VTs
•CTs
•CVTs
•CCVTs
•Optical voltage and current transducers, Instrument Transformer
6.Power Circuit Breaker Overview
•Purpose/Application
•Types of Circuit Breakers
•Circuit Breaker Operation
•Circuit Breaker Control
•Circuit Breaker Selection Guide
7.Electrical Power Transformer Protection
•Short circuit/over load protection
•Unbalance protection
•Over Temperature protection
•Over pressure protection
8.Insulation Testing
•Insulation Resistance Test
•Tan delta Test
•Withstand Test Impulse Test
9.Electrical Power Transformer Testing
•Insulation resistance Test
•Withstand Voltage Test
•Impulse Voltage Test
•Winding resistance and transformer turns ratio (TTR)
10. Transformer Maintenance
•Type of maintenance
•Measurement and testing

Peserta
Untuk para operator, teknisi, engineer yang ingin mengetahui/mendalami tehnik pengoperasian dan pemeliharaan
transformer dalam system perawatannya.

Instruktur
Tugino, ST., MT and team
(CV Terlampir)

Waktu & Tempat
Tanggal : 18 sd 20 Oktober 2016
Jam       : 08.00 – 16.00
Tempat :  Hotel Grand Aston Yogyakarta

Fasilitas
•Convinience Meeting room
•Airport pick-up and drop service
•Souvenir
•Certified
•Transportation during training
•2x coffee break and lunch during training
•Training kit

Pendaftaran Hub
Egga
WA : 091343582804
Email : eggatraining@gmail.com

CG

The post Training Power Transformer Operation And Maintenance appeared first on SEMINAR BAGUS.

Deskripsi
GIS (Geographic Information System) atau di Indonesia dikenal SIG (Sistem Informasi Geografis) adalah sistem aplikasi untuk pengelolaan data yang memiliki informasi spasial (bereferensi keruangan) yang dirancang untuk bekerja dengan data yang berkoordinat geografi. Tujuan pokok dari pemanfaatan GIS adalah untuk mempermudah mendapatkan informasi yang telah diolah dan disimpan sebagai atribut suatu lokasi atau obyek.  Misalnya, GIS bisa membantu merencanakan pengelolaan sumber daya, perencanaan pembangunan, kartografi maupun menghitung waktu tanggap darurat saat terjadi bencana alam, atau yang lainya. Hampir semua bidang yang bekerja dengan informasi memerlukan GIS, di antaranya bidang pertanian, kesehatan, perikanan, kehutanan, perkotaan, tambang, lingkungan, transportasi dan lain-lain
Aplikasi SIG dapat digunakan untuk berbagai kepentingan selama data yang diolah memiliki refrensi geografi, maksudnya data tersebut terdiri dari fenomena atau objek yang dapat disajikan dalam bentuk fisik serta memiliki lokasi keruangan.
Tujuan pokok dari pemanfaatan Sistem Informasi Geografis adalah untuk mempermudah mendapatkan informasi yang telah diolah dan tersimpan sebagai atribut suatu lokasi atau obyek. Ciri utama data yang bisa dimanfaatkan dalam Sistem Informasi Geografis adalah data yang telah terikat dengan lokasi dan merupakan data dasar yang belum dispesifikasi.

Tujuan
Setelah mengikuti pelatihan ini peserta diharapkan mampu :
1.Membuat peta dasar dan tematik.
2.Mengolah berbagai jenis data menjadi data GIS/data spasial.
3.Menyajikan berbagai data dalam bentuk spasial yang siap pakai sesuai dengan tujuan pengguna.

Materi Pelatihan
•Pengantar GIS
•Arccatalog
•Geodatabase
•Rektifikasi
•Digitasi peta
•Praktik Global Positioning System (GPS)
•Link database
•Menampilkan data berdasarkan kategorinya
•Query data
•Output dan penyusunan layout peta.

Instruktur
Ir. Joko Hartadi, M.T. dan Tim
(CV Terlampir)

Fasilitas
•Airport pick-up and drop service
•Transportation during training
•2x coffee break and lunch during training
•Training kit
•Qualified instructor

Metode
•Presentation
•Discussion
•Simulation
•Case Study
•Evaluation

Time & Venue
Hari/Tanggal : 06 sd 08 September 2016
Pukul         : 08.00 – 16.00 WIB
Tempat         : Hotel Eastparc Yogyakarta

Pendaftaran Hub
Egga
WA : 081343582804
Email : eggatraining@gmail.com

CG

The post Training Geographic Information System (GIS) appeared first on SEMINAR BAGUS.