ISO 9000:2000

SERIES QMS INTERNAL AUDITOR

 DESKRIPSI

Audit merupakan kegiatan yang penting untuk kemajuan dan peningkatan kinerja organisasi. Dari hasil audit yang baik, manajemen dapat mengetahui kondisi proses-proses di organisasi sehingga dapat melakukan perbaikan-perbaikan dan lebih daripada itu, melakukan peningkatan dan pengembangan secara terus menerus. Pada pelatihan ini peserta akan dilengakapi dengan pengetahuan dan keterampilan yang lengkap untuk melakukan audit, memimpin tim audit dan membuat laporan audit yang baik dan benar.

MATERI KURSUS

• Mutu dan standar mutu
• Audit life cycle
• Peranan seorang Auditor dan Lead Auditor
• Interpretasi ISO 9001:2000
• Merencanakan audit
• Mempersiapkan daftar/checklist yang efektif
• Mengaudit Sistem Manajemen Mutu terdokumentasi
• Audit Berdasarkan proses
• Mempersiapkan dan melakukan opening dan closing meeting
• Tipe-tipe audit
• Teknik dan keterampilan auditor
• Analisa dan presentasi temuan hasil audit
• Mengatasi masalah-masalah yang dihadapi dalam melakukan audit

PESERTA

Manajer, Supervisor, HRD maupun Tim sistem mutu yang ingin menambah wawasan untuk menjadi internal.

WAKTU & TEMPAT

5 – 7 Maret 2013

08.00 – 16.00 WIB

Hotel Ibis Yogyakarta

INSTRUKTUR

Prof. Samin Prihatin

METODE

Presentation, Discussion, Case Study, Evaluation Pre test & Pos Test

FASILITAS

1. Certificate
2. Training Modul
3. Flashdisk
4. NoteBook and Ballpoint
5. Jacket or waistcoat or T-Shirt
6. Bag or backpackers
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Once lunch and twice coffeebreak every day of training
10. Qualified instructor
11. Transportation for participants from hotel of participants to/from hotel of training

REGISTRASI

Biaya kursus: Rp. 6.000.000,- per peserta (Non Residential)

Rp. 5.500.000,- per peserta ( Pendaftaran 3 peserta dari 1 perusahaan)

The post SERIES QMS INTERNAL AUDITOR appeared first on SEMINAR BAGUS.

“CONTROL VALVES AND ACTUATORS: Selection, Calculations, Sizing, Applications, Operation, Diagnostic Testing, Troubleshooting, and Maintenance”

Deskripsi

Extensive course materials provided contained useful information about valves/sizing and selection both theoretical and practical. You will gain a practical understanding of control valves, actuators, and positioner designs and their applications. The course also provides methods that can be used to identify specific valve problems and arrive at acceptable solutions within engineering tolerance.

Tujuan

1. Compare various types of final control elements
2. Understand a typical valve operation in a control loop
3. Differentiate between various types of valves and the benefits of each
4. Compare rising stem to rotary style valves
5. Analyze a control system to determine control valve needs
6. Use ISA standards for control valve specification and selection
7. Size valves for any flow condition likely to be found in a process plant
8. Evaluate and select actuators for specific applications
9. Specify appropriate auxiliaries including positioners and I/P transducers
10. Design control valve installations that are safe and trouble-free

Sertifikat Training

Setelah mengikuti training ini, bagi peserta yang lolos kualifikasi akan mendapatkan sertifikat dari lembaga pelaksana training PT Centra Gama Indovisi.

Materi
Introduction:
• Valve in Loop,
• Actuator,
• Positioner
2. Basic Valve Types:
• Globe Valves,
• Ball Valves,
• Plug Valves,
• Butterfly Valves
3. Actuators:
• Spring/Diaphragm,
• Piston,
• Vane,
• Scotch-Yoke,
• R & P
4. Comparison:
• Rising Stem,
• Rotary Stem,
• Accessories,
• Positioner,
• I/P Converters
5. Valve Performance:
• Gain,
• Time,
• Trim,
• Special Needs
6. Flashing/Cavitation & Noise:
• Cause/Effect,
• Prevention,
• OSHA,
• Source and Abatement
7. Installation:
• Performance, Safety and Others
8. Valve Sizing:
• Valve sizing calculation Manual,
• Valve Sizing calculation Computer
9. Specification and Selection:
• Process Requirements,
• Other Considerations
10. Maintenance and Troubleshooting Considerations:
• Special Requirements,
• Diagnostic Tools
11. Smart Valves:
• Available Designs,
• Applications in Industry
12. Test valves to evaluate performance factors
13. Size valves manually and with software
14. Specify valves, actuators, and auxiliaries for specific applications
15. Evaluate operation of valves with pneumatic actuators and positioners
16. Smart valve/positioner operation demonstration

Peserta

This Intensive program covering the educational needs of Instrumentation and Control Engineers & Technicians, Mechanical Engineers & Technicians, Projects Engineers, Operation Engineers, Process and Utility Supervisors, and Technical Supervisory personnel involved in Sizing, Selecting, and Applying Process Control Valves. No specific prerequisite training or experience required for registration.

Koordinator

Dr. Eng. Deendarlianto, & Team

Waktu & Tempat

Durasi pelatihan selama 3 hari.

Yogyakarta, Ibis Hotels Malioboro : 19 s.d 21 Maret / 21 s.d 13 Mei/ 27 s.d 29 Agustus/ 19 s.d 21 November 2013

Facilities

• Modul
• Sertifikat
• Souvenir
• Training kit
• 2x Coffe Break dan Lunch

Metode

• Presentasi
• Diskusi
• Studi Kasus
• Simulasi
• Evaluasi

Biaya

Public Training:

Rp 6.500.000,-  Per Peserta Nett Non Residential

** Untuk pendaftran Group minimal 3 orang Biaya training Rp. 6.000.000,-/per peserta nett non residential***

The post CONTROL VALVES AND ACTUATORS appeared first on SEMINAR BAGUS.